Lange Ag Systems Hog Watering Systems

Hog Watering Systems

Mirafount Waterers

3410

SPECIFICATIONS
Capacity	100 head market hogs 50 head sows
Gallons	6
Specifications	Two lift-up lids / 10" openings
Dimensions	19" x 34" x 16"
Weight	52 pounds

3410-4

SPECIFICATIONS
Capacity	200 head market hogs or 100 sows
Gallons	15
Dimensions	34" x 36" x 16"
Width	26"
Weight	95 pounds

Smidley Hog Bars Stainless Steel Waterer

Automatic Valves

Underground Shut Off Kit

Heaters

#399-5 with Drain Back

#543 with built-in thermostat 250 Watt Immersion Heater

#543-5 500 Watt Immersion Heater (110 Volt or 220 Volt)

#919-5 Thermostat Controlled Cable Line Heater (110 Volt or 220 Volt)

Hookup Kits

834 Insulated Heat Tubes

#158 2' rubber hose (200psi) with shut off valve

#184 I' rubber hose (200 psi) with shut off valve

Highly insulated tube shields incoming ground water from cold as it passes through the frost level. Polyethylene construction ensures years of troublefree use. One 30.inch tube and 3 feet of 12-inch plastic drainage tile provides a sufficient heat well in most locations. For northern locations, two 30-inch heat tubes may be required.

Outside Dimensions 14" X 30" (36 x 76 em)
Weight 16 pounds (7 kg)

#336 14 gpm low 5-40 psi

#521 12.5 gpm high 40-80 psi

260-0100 L-70 Lixit nipple	370-0013 1/2" wet feeder nipple drinker	370-0010 1/2" nipple
370-0020 piglet nipple 1/2" x 3/8"	370-0029 3/8" nipple O-Ring	370-0040 1/2" nipple O-Ring
370-0049 1/2" red oriface & dome	370-0060 1/2" dome screen (screen only)	370-0130 plastic clamp, black
370-0132 too, 1/4" x 1/4"	370-0028 3/8" nipple spring 370-0030 1/4" nipple spring	370-0135 1/4" barb x 1/4" NPT swivel
370-0140 1/4" barb x 1/2" NPT swivel	370-0141 1/2" x 1/4" FPT nylon barb (all one piece)	370-0146 1/4" stainless steel barb for 1/2" plastic nut
370-0147 1/2" swivel nut	370-0150 thin washer	360-0032 250 watt tank heater

Specifications
(Center - to - Center)
Model No.	Drinks	Width	Height	Length	Shipping Weight (LBS)	Mounting Hole Ends	Mounting Hole Lidside
91501010	10	32"	10 3/4"	57 1/4"	210	14 7/8"	55 1/4"
9150166	6	32"	10 3/4"	36 7/8"	150	14 7/8"	34 7/8"
9150154	4	32"	10 3/4"	26 3/4"	110	14 7/8"	24 3/4"
9150142	2	32"	10 3/4"	16 5/8"	75	14 7/8"	14 5/8"
9150152*	2	16 1/2"	10 3/4"	26 3/4"	70	11 1/4"	24 3/4"
9150141	1	22 1/2"	10 3/4"	16 5/8"	35	17 3/8"	14 5/8"
All hog bars available in half models (drink troughs on one side only.)

Model No.	Hog Bar Accessories
10038	Heating Element - 4 drink (each)
10045	Heating Element - 2 drink (each)
10046	Heating Element - OLD STYLE 1 drink (each)
9150T	Thermostat
915LG	Drink Lid - Galvanized
915LS	Drink Lid - Stainless Steel
9152LR	Lid Rod - 1 Drink or 2 Drink
9154LR	Lid Rod - 4 Drink
9156LR	Lid Rod - 6 Drink
9152TL	Top Lid - 2 Drink or NEW STYLE 1 Drink (painted)
9152TLS	Top Lid - 2 Drink or NEW STYLE 1 Drink (stainless)
9151TL	Top Lid - OLD STYLE 1 Drink (painted)
9151TLS	Top Lid - OLD STYLE 1 Drink (stainless)
9154TL	Top Lid - 4 Drink (painted)
9154TLS	Top Lid - 4 Drink (stainless)
91514TL	Top Lid - 1/2 2 Drink (painted)
91514TLS	Top Lid - 1/2 2 Drink (stainless)
9156TL	Top Lid - 6 Drink (painted)
9156TLS	Top Lid - 6 Drink (stainless)
915BF	Barb Fitting
915SL	Supply Line (Hose only)
915SLC	Supply Line With Barbs
915FP	Flush Plug

Cattle Fountain Accessories
Model No.	Heating Element	-
915HEC1	#1 Cattle	Quantity (1)
915HEC2	#2 Cattle	Quantity (1)
915HEC3	#3 Cattle	Quantity (2)
915HEC5	#5 Cattle	Quantity (2)
915HCC3	#3 Combination (ctr. float box)	Quantity (4)
915HCE3	#3 Combination (end float box)	Quantity (3)
915HCC5	#5 Combination	Quantity (4)
915HCT3	#3 Cattle Trough	Quantity (2)
915HCT5	#5 Cattle Trough	Quantity (4)
915HEST	Sheep Trough	Quantity (4)

Model No.	Float & Valve Complete
14537	#1, #2 Cattle Fountain (short float, long arm, high pressure valve)
14536	All other Cattle Fountains
14537	All Floats & Valves for Hog Portion of Combination
915SSHC	Stainless Steel Hose Clamp
915FP	Flush Plug

© Lange Ag Systems
193 County Road NE
Willmar, MN 56201
Phone: 800.479.0243
Fax: (320) 231-1471
info@langeagsystems.com